Two styles of vaping
The Aspire Tigon tank can be used for mouth-to-lung or direct-to-lung vaping by swapping the coils around. Use the 0.4ohm coil for more vapour and a direct-to-lung hit or the 1.2ohm coils for a tighter draw with mouth-to-lung hits. Learn more about mouth-to-lung and direct-to-lung vaping here.
Push Fit Coils
One major advantage of the Aspire Aspire Tigon tank is that it comes with push fit coils instead of screw in coils. This means you can simply pull the coil off the bottom and replace it with a new one without having to open the tank and expose the e-liquid. Inside the tank, a spring loaded sleeve seals the wicking holes while the coil is being replaced to eliminate leaking. This allows for a quicker and easier coil changing and cleaning process. The coils are made from high-grade nichrome wire for great flavour.
The Tigon comes with a sliding top which reveals a fill port for easy filling. Inside the top is a self-sealing valve to ensure leak free refilling.
Dual Function Airflow Control
The Tigon also comes with very neat dual airflow controls. The mouth-to-lung air controls feature five small airflow holes which allow you to choose between a very tight and restricted vape to a more open one, depending on how many holes you select. Alternative, you can rotate the airflow control further to reveal a slot hole. When this is opened wide it gives the maximum airflow and is suitable for direct-to-lung vaping.
Who’s it for?
With the choice of two styles of vaping the Aspire Tigon tank is likely to have a wider appeal than the average vape, and is suitable for both vapers who prefer tight draws and who like decent clouds of vapour. It won’t be suitable for people who want huge clouds of vapour, and if that’s you you’d be better off looking for a device with a lower resistance range and more power.
The Aspire Tigon tank works with Tigon coils, and is compatible with most 510 connection mods.
Aspire recommends using the coils at the following wattages:
0.4 Ω Direct Lung Coil: 23-28 watts
1.2 Ω Mouth-to-Lung Coil: 10-12 watts
The DL coil is best used with e-liquids with a VG:PG ratio of around 50:50, while the MTL coil is best used with high VG e-liquids.
Priming the coil
As with all coils, it’s important to prime the device before using it for the first time. To do this, simply drip a little e-liquid into the coil before using for the first time. After attaching to the tank and filling, allow the tank to stand for a few minutes before using.
- Width: 23mm
- Height: 49mm
- Capacity: 2ml
- E-liquid sealing mechanism
- Childproof features
- Easy top fill
Whats in the Box?
- 1x Tigon tank(2.0ml)
- 1x Glass tube
- 2x Ni80 Coils (1*1.2Ω & 1*0.4Ω preinstalled)
- 1x Screw adjustment tool
- 10x O-rings
- 1x Extra drip tip
- 1x User manual
- 1x Warranty card
At E-Cigarette Direct we pride ourselves on providing you with superb after-sales support, and aim to provide rapid replacements for any faulty device under warranty. This page details the warranties you get with your device, and how to get a replacement.
Your charger comes with a 12 month warranty.
All mods and batteries are under warranty for three months.
All clearomisers (tanks) with the exception of CE5 clearomisers are under warranty for six months. CE5 clearomisers (tanks) are under warranty for one month.
Please note - these warranties do not apply to the coil within a clearomiser or tank which is a consumable product as below.
Coils are a consumable product, and as such, will be replaced only if faulty on arrival. Please let us know within 5 days of receipt if your new coil does not work.
What does your warranty mean?
We guarantee that your device is, and will remain, free from defects for the period of the warranty. Please note - this applies to faulty products, and not accidental damage (e.g. dropping on a hard floor!)
The above warranties are subject to our terms and conditions. Please see our full warranty information for further details.
What if the warranty has run out?
We're still here to help! Many problems can be diagnosed and solved (or we can point you towards one of our helpful guides), so send us an email, give us a call for advice or pop into one of our stores for face-to-face support and help.
How do I get a replacement?
In the unlikely event you have a problem with your device, just contact our friendly customer service team on [email protected]
You’ll need to return the item (we can cover a free delivery charge). If we are unable to diagnose and solve your issue, we’ll send you a replacement by Royal Mail First Class. It helps if you have your order number, but if not our team should be able to find your order using your email address.
Delivery & Returns
Hassle Free Returns plus Free Delivery On Orders Over £15
Usually next working day*
Usually 2-4 working days*
Usually next working day (if ordered before 4pm)
Up to £14.99 £3.99 £2.49 £7.99 £15 to £19.99 £1.99 FREE £7.99 £20 + FREE - £7.99
*Estimated delivery time based on working days and does not include weekends or Bank Holidays. Delivery times vary depending on location so please take into account typical service expectations in your area.
Unfortunately, we can no longer deliver to EU addresses outside the UK due to new EU regulations.
Hassle-Free Returns - & 90 Days to Change Your Mind
Need to return an item? We aim to make the process as easy as possible (it’s also free!)
Just send an email to our friendly customer service team on [email protected], give us a call on 01792 852843 or contact us on chat.
When can I make a return?
When you have an unwanted present or have changed your mind - you’ve got 90 days to decide! Please note this only applies when you have not used the product, and it is in a resalable condition.
You have a faulty product under warranty.
You can see our full returns policy in our terms and conditions.
Not in the UK?
You can see the full list of countries we deliver to here.