Coolfire Z50 Zlide Kit

by Innokin

The Innokin Coolfire Z50 mod has a wattage range which is suitable for both MTL and restricted DL vaping and comes with simple and intuitive controls and user interface. The mod works well with existing Zlide tanks and coils as well as the included Innokin Zlide tank, but handily is compatible with any 22 mm and 24 mm tank. The Z50 comes with a 2100 mAh capacity, which means it will last most vapers a day of usage before needing charging.

The mod also comes with an off button at the base, which enables you to switch off the device when carrying it in your pocket, helping to ensure longer coil life.

The included Innokin Zlide tank comes with a push-to-open fill mechanism, which opens a filling port for quick, easy and mess-free filling. The tank has a replaceable glass (included with the kit), meaning you won’t need to replace the whole tank if the glass is cracked.

The tank is also designed to allow for easy coil changes, even when the tank is full, which means you won’t waste any e-liquid.

Who is the Innokin Coolfire Z50 Kit for?

The Coolfire Z50 is a great choice for vapers looking for an intuitive but versatile device which is capable of both a MTL or a restricted DL vape.

FAQs

How do I fill the tank?

Remove the drip tip, then push the top cap to the side to open up the side fill port.

How do I remove the coil?

Unscrew the bottom of the tank, and pull the coil out.

How do I turn the device on or off?

At the bottom of the mod there is a button marked on/off. Ensure this is clicked to on. You can then turn the device on or off by clicking the fire button 3 times. We advise using the on/off button when carrying the device in a bag or pocket to avoid accidental firing of the device, which can damage the coil.

What e-liquids can I use with the Innokin Zenith Pro?

That all depends on the coil you are using. Higher resistance Z (Zenith) coils, such as the 1.6 Ω Z coil, are suitable for e-liquids with a VG:PG ratio of around 50:50. Lower resistances Z coils, such as the 0.48 Ω Z 3d Mesh coils, work well with high VG e-liquids, such as those with a VG:PG ratio of around 70:30 or 80:20.

Specs

• Output range: 6-50W
• Battery: 2100mAh internal
• Resistance range: 0.2-3.5ohm
• Voltage range: 3-7.5 watts
• Cut off time: 15 seconds
• Max output: 20A
• Display: 0.69in OLED screen
• Body material: Zinc alloy
• Thread: 510

• 1 x Coolfire Z50 Mod
• 1 x Zlide Tank
• 1 x 1.2 Ω Z Coil (pre-installed)
• 1 x 0.8 Ω Z Coil
• 1 x Micro USB Cable
• 1 x Replacement glass tube
• 1 x Spare drip tip
• 1 x Spare o-ring set
• 1 x Quick Start Guide

Hassle Free Returns plus Free Delivery On Orders Over £15

Delivery Prices and Speeds

Due to the current Covid pandemic, Royal Mail are dealing with both huge demand and staff shortages. Our post men and women are doing a tremendous job despite that, but please be aware that from time to time deliveries may take a little longer than usual.

Hassle-Free Returns - & 90 Days to Change Your Mind

Need to return an item? We aim to make the process as easy as possible (it’s also free!)

Just send an email to our friendly customer service team on [email protected], give us a call on 01792 852843 or contact us on chat.

When can I make a return?

• When you have an unwanted present or have changed your mind - you’ve got 90 days to decide! Please note this only applies when you have not used the product, and it is in a resalable condition. 

• You have a faulty product under warranty.

You can see our full returns policy in our terms and conditions.

Not in the UK?

You can see the full list of countries we deliver to here.

The Right and Wrong Ways to Treat Batteries!

Battery Safety Information

Do

• Ensure you use the correct charging equipment for your e-cig (see below).
• Charge batteries on a hard surface.
• Turn your battery off when not in use.

Don’t

• Use damaged batteries.
• Leave charging batteries unattended.
• Allow contact between your batteries and water.
• Carry in a pocket with coins or keys. (The KBag is a great way to carry batteries securely and safely).
• Expose your battery to sunlight, extreme heat or cold.

For more information see our E-Cig Battery Safety Infographic.

Recommended Charging Equipment

We recommend the Veho Plug Adaptor and the Nitecore Intelli Charger (for external batteries). Both are high quality devices from a reputable manufacturer, have performed well in testing and have the right voltage output for e-cigs.

Extending Your E-Cig Battery Life

With regular usage, your e-cig battery will usually last for 3 months, although they can last longer. The following steps can help extend the life of your battery

1. Cleaning your battery terminal. The most effective way to do this is to use a cotton swab soaked in alcohol, but you can also clean it with a tissue or a cotton swab.
2. Keeping your battery charged. Keeping some charge in your battery can extend your battery life, especially if you go for some time without using it.

Also see: 9 Ways to Extend the Life Of Your Battery | Trouble Shooting Battery Issues

Using Your Tank: Best Practice

Follow these simple steps to get the most out of your tank.

1. When filling, always avoid getting e-liquid in the centre tube.
2. Don’t hold down the button before inhaling.
3. When attaching the coil, screw it in firmly but don’t over-tighten.
4. Make sure you use the right power settings. If unsure, check the manual or start with a low power setting and work your way up till you get the right hit.

Also see: 14 Ways to Stop Your Tank from Leaking.

[Advanced Tanks] How To Maximise the Life Of Your Coils

Coils don't last forever, but by taking a few easy steps you can often extend their life!

First, it's well worth priming your coil before you use it for the first time. Simply add a couple of drops of e-liquid to the ports in the coil and in the opening of the coil head.

Always allow your e-liquid to soak into your coil for at least five minutes before using it. This will help prevent your coil from burning out.

Once you’re using the device, it is important to keep your tank topped up. If the e-liquid gets too low and the coil is exposed, the coil can burn out.” .

For more advice, see Seven Easy Ways to Stop Your Coil From Burning Out.