- Vertical Coil
- Magnetic Battery Compartment
- Sturdy but stylish construction
- Thread: 510
- Reverse Power Protection
- Over Temperature Protection
- Short Circuit Protection
- Open Circuit Protection
- 10 Second Overtime Usage Protection
- Cell Capacity Protection
- Capacity: 2500mAh (depends on battery)
- Rated output wattage: 7 - 50w in 01 watt increments
- Variable Wattage Range: 0.3-1.6ohm
- Height: 82mm
- Length: 22mm
- Weight: 110g
Sub-ohm capable, the Kanger is suitable for experienced vapers only. That said, in contrast to many other mods, the Kanger is startlingly easy to use. And if you’re looking to take your first step into mod vaping, the Kanger will be ideal. That doesn’t mean it’s only suitable for mod beginners, though!
That’s because another key feature of this impressive mod is its versatility! In fact, the Kanger Subox mini is one of the most complete mod kits we have seen, coming with a sub ohm coil, a high resistance coil and even a rebuildable kit allowing you to make your own coils.
The only thing it doesn’t include is the battery, which you will need to purchase separately. The battery can be charged either in the mod using the enclosed USB charger or using the intelligent Nitecore charger (sold separately). The battery is held firmly in a place by a magnetic battery door - which also clicks shut with a very satisfying clunk.
If you’re caught short, you can also use the Subox’s pass through capability to charge while you vape.
Range & Ease of Use
Use the coil with the enclosed low resistance coil, open up the airflow to full and you can expect to puff out huge clouds of vapour. But if that’s not your thing, you can also switch over to a high resistance coil and switch to a smaller airflow hole for a tighter vape with tons of flavour.
But it’s all so easy to use! Simply switch on (there’s no lock function, but as it starts up almost instantly there’s no need for one), use the plus or minus buttons to select the wattage you want and press the fire button!
Meanwhile, if you’re a rebuildable enthusiast, you’ll find a screwdriver, coil wire, organic Japanese cotton and an RDA - everything you need to build your own coil.
The Kanger also comes with a ceramic coating, which is very effective at dissipating heat.
Rebuildable Kit: Disclaimer
Building your own coil requires knowledge of ohms and resistance. Building a coil incorrectly could lead to the battery shorting. We do not provide any warranty for products used with rebuildable coils.