The Drag S Pro keeps the stylish, soft leather finish and rounded, ergonomic design that the Drag series is known for, but with some big improvements on previous models. New features include the upgraded GENE.FAN 3.0 chip, improved performance, increased battery capacity, larger clouds, more flavour and a new on/off toggle switch.
The Drag S Pro features 5 - 80W of adjustable output and is powered by a 3000mAh built-in battery. USB-C fast charging means the battery can be fully recharged in 60 minutes.
The GENE.FAN 3.0 chip gives the Drag S Pro up to 20% better overall performance than previous models and provides users with a choice of vaping modes. You can choose between Smart, RBA and Temperature Control* modes for full control over how you vape. (See more about these modes in the FAQs below.)
* Please note: Temperature Control mode must be downloaded from the Voopoo website.
The Drag S Pro kit includes the TPP X pod, which works with TPP coils for a satisfying Direct-Lung vape with large clouds and great flavour. The TPP X pod improves on the original TPP pod with the inclusion of a new 360 infinite airflow control so you can precisely tailor your air intake for a tighter or more airy vape.
For added versatility, there is also a choice of both manual and auto draw options - you can either use the fire button to fire the device or inhale on the tank to activate auto draw.
A large colour screen provides you with important data including wattage, battery life and mode options so you can monitor your device and control its settings.
COMPATIBLE COILS & E-LIQUIDS
The Voopoo TPP X pod is compatible with TPP coils and is recommended for use with high VG e-liquids with a VG:PG ratio of 70:30 or above.
- 0.15Ω TPP-DM1 Coil: 60 - 80W (Best at 65 - 75W)
- 0.3Ω TPP-DM4 Coil: 32 - 40W (Best at 35W)
Who is the Voopoo Drag S Pro kit for?
The Drag S Pro is suited to vapers of all experience levels looking for a Direct-Lung vape that looks good and provides big clouds and flavour.
Newer, less experienced users can utilise Smart Mode while those with more experience can use the more advanced mode options.
What e-liquid can you use with the Voopoo Drag S Pro kit?
When used with the included coils, the included TPP X pod is best used with high VG e-liquids with a VG:PG ratio of 70:30 or more.
What does temperature control mean?
In VW mode, the resistance of the coil can change as the coil heats up. In Temperature Control mode, you set the resistance of your coil. The mod uses the resistance of the coil to detect any change in temperature. The mod will adjust or maintain power to keep consistency in resistance, and therefore temperature. This leads to a more consistent flavour profile and can also extend the life of the coil.
What is Smart Mode?
The Smart Mode feature varies from device to device, but in most cases Smart Mode is an intuitive feature that takes the guesswork out of controlling the power of devices and prevents the coil from burning out prematurely.
Usually, Smart Mode will detect the resistance of the coil being used and will either set the device’s output to the recommended wattage, suggest a wattage or restrict the wattage range you can choose accordingly.
How do I switch modes on my Drag S Pro?
To switch between vaping modes, press the + and - buttons on the Drag S Pro to enter mode settings.
How long does the Drag S Pro take to charge?
Your Drag S Pro should reach full charge in 1 hour when using the included cable.
Can I charge my Drag S Pro overnight?
Lithium batteries should not be left unattended when charging. It is also important to use an appropriate charger such as the Veho Plug Adaptor. For more information see our battery safety infographic.
Can you wash a TPP X pod?
Yes. Remove the pod from the device, remove the coil and empty out any e-liquid. Wash the pod out with warm (not boiling) water and ensure that it is fully dry before using it again. You can also clean the connections out with cotton to remove dust.
How long do the coils last?
Coil life depends on many factors, including how long you puff for, the e-liquid you use and the wattage you use your coil at. Low resistance coils, which are used at higher wattages, will not last as long as high resistance coils.
You can extend coil life by:
- Priming the coil before usage
- Using e-liquid with the right VG:PG ratios
- Not going above the recommended wattage
- Topping up your pod so that the coil never dries out
With care, the included TPP coils should last several days before needing to be replaced.
- Short Circuit
- Max Power
- Output Over Current
- Over Discharge
- Over Temperature
- Power Output: 5 - 80W
- Battery: 3000mAh
- Mod Material: Alloy & Leather
- Output Voltage: 0 - 8.5V
- Resistance Range: 0.1 - 3.0Ω
- Pod Capacity: 2ml
- Pod Material: Stainless Steel & PCTG
Whats in the Box?
- 1 x Drag S Pro Mod
- 1 x TPP X Pod
- 1 x 0.15Ω TPP-DM1 Coil
- 1 x 0.3Ω TPP-DM4 Coil
- 1 x USB-C Cable
- 1 x User Manual
At E-Cigarette Direct we pride ourselves on providing you with superb after-sales support, and aim to provide rapid replacements for any faulty device under warranty. This page details the warranties you get with your device, and how to get a replacement.
Your charger comes with a 12 month warranty.
All mods and batteries are under warranty for three months.
All clearomisers (tanks) with the exception of CE5 clearomisers are under warranty for six months. CE5 clearomisers (tanks) are under warranty for one month.
Please note - these warranties do not apply to the coil within a clearomiser or tank which is a consumable product as below.
Coils are a consumable product, and as such, will be replaced only if faulty on arrival. Please let us know within 5 days of receipt if your new coil does not work.
What does your warranty mean?
We guarantee that your device is, and will remain, free from defects for the period of the warranty. Please note - this applies to faulty products, and not accidental damage (e.g. dropping on a hard floor!)
The above warranties are subject to our terms and conditions. Please see our full warranty information for further details.
What if the warranty has run out?
We're still here to help! Many problems can be diagnosed and solved (or we can point you towards one of our helpful guides), so send us an email, give us a call for advice or pop into one of our stores for face-to-face support and help.
How do I get a replacement?
In the unlikely event you have a problem with your device, just contact our friendly customer service team on [email protected]
You’ll need to return the item (we can cover a free delivery charge). If we are unable to diagnose and solve your issue, we’ll send you a replacement by Royal Mail First Class. It helps if you have your order number, but if not our team should be able to find your order using your email address.
Delivery & Returns
Hassle Free Returns plus Free Delivery On Orders Over £15
Second Class First Class Tracked 24 Up to £14.99 £2.49 £2.99 £4.99 £15 to £19.99 FREE £1.99 £2.99 £20 to £99.99 - FREE £1.99 £100 + - - FREE
Unfortunately, we can no longer deliver to EU addresses outside the UK due to new EU regulations.
Hassle-Free Returns - & 90 Days to Change Your Mind
Need to return an item? We aim to make the process as easy as possible (it’s also free!)
Just send an email to our friendly customer service team on [email protected], give us a call on 01792 852843 or contact us on chat.
When can I make a return?
When you have an unwanted present or have changed your mind - you’ve got 90 days to decide! Please note this only applies when you have not used the product, and it is in a resalable condition.
You have a faulty product under warranty.
You can see our full returns policy in our terms and conditions.
Not in the UK?
You can see the full list of countries we deliver to here.
Using Your Tank: Best Practice
Follow these simple steps to get the most out of your tank.
- When filling, always avoid getting e-liquid in the centre tube.
- Don’t hold down the button before inhaling.
- When attaching the coil, screw it in firmly but don’t over-tighten.
- Make sure you use the right power settings. If unsure, check the manual or start with a low power setting and work your way up till you get the right hit.
The Right and Wrong Ways to Treat Batteries!
Battery Safety Information
- Ensure you use the correct charging equipment for your e-cig (see below).
- Charge batteries on a hard surface.
- Turn your battery off when not in use.
- Use damaged batteries.
- Leave charging batteries unattended.
- Allow contact between your batteries and water.
- Carry in a pocket with coins or keys. (The Kbag is a great way to carry batteries securely and safely).
- Expose your battery to sunlight, extreme heat or cold.
For more information see our E-Cig Battery Safety Infographic.
Recommended Charging Equipment
We recommend the Veho Plug Adaptor and the Nitecore Intelli charger (for external batteries). Both are high quality devices from a reputable manufacturer, have performed well in testing and have the right voltage output for e-cigs.
Extending Your E-Cig Battery Life
With regular usage, your e-cig battery will usually last for 3 months, although they can last longer. The following steps can help extend the life of your battery
- Cleaning your battery terminal. The most effective way to do this is to use a cotton swab soaked in alcohol, but you can also clean it with a tissue or a cotton swab.
- Keeping your battery charged. Keeping some charge in your battery can extend your battery life, especially if you go for some time without using it.
How To Maximise the Life Of Your Coils
Always allow your e-liquid to soak into your coil for at least five minutes before using it. This will help prevent your coil from burning out.
When you have a more powerful coil, or one with more wicking material, it’s also a good idea to prime it by applying a few drops of e-liquid into the coil holes before filling.
Once you’re using the device, it is important to keep your tank topped up. If the e-liquid gets too low and the coil is exposed, the coil can burn out.
For more advice, see Seven Easy Ways to Stop Your Coil From Burning Out: