The Vaporesso GTX GO 80 is an easy to use pod device designed for simplicity with a single button operation.
The device outputs 80W and is powered by a built-in 3000mAh battery that should last most users a full day of use on one charge. When the battery does run flat, the USB-C charging design means the battery will be quickly recharged and ready to use again.
The included 2ml GTX POD 26 is compatible with the full GTX coil range. This means it can support different kinds of e-liquids and both MTL and DL vaping styles. (See more about these styles in the FAQs below). The rotating airflow wheel also means you can tailor your air intake for an airier or more restricted vape and more or less intense flavour.
GTX POD 26 pods are designed with a strong magnetic base that both keeps it sturdily attached to the device but also makes it quick and easy to remove for coil changes. The pod also features a convenient top-fill port that makes topping up your e-liquid effortless. The inclusion of SSS leak-resistant technology makes the pod completely leakproof - meaning you don't need to worry about any e-liquid spilling or being wasted.
Compatible Coils & E-liquids
The GTX GO 80 can be used with both VG:PG 50:50 and high VG e-liquids.
The GTX GO 80 with the GTX POD 26 works with triple silicone Vaporesso GTX coils.
- 50:50 e-liquids: Use 0.8ohm or 1.2ohm GTX coils (not included)
- High VG e-liquids: Use 0.2ohm (included), 0.3ohm or 0.6ohm GTX coils
RECOMMENDED WATTAGE
- 0.2ohm GTX Mesh: 45 - 60W
Who is the Vaporesso GTX GO 80 for?
The GTX GO 80 is suitable for vapers with at least some experience but the easy-to-use features and minimalist design mean you don't need to be an expert. This means t's a great choice for those looking for their first Direct-Lung device as they transition from MTL to DL vaping.
The choice of vaping styles, coil compatibility and adjustable airflow mean it will also suit more experienced vapers looking for a versatile pod device.
FAQs
What e-liquid can you use in the Vaporesso GTX GO 80?
When used with the included 0.2ohm GTX mesh coil, the GTX GO 80 is best used with high VG e-liquids with a VG:PG ratio of around 60:40 or 70:30.
It can also be used with 50:50 VG:PG e-liquids when paired with 0.8ohm or 1.2ohm GTX coils (sold separately).
What does SSS technology mean?
SSS stands for: Seal comprehensively, saturate properly, store safely and is a leakproof technology used to prevent e-liquid escaping from the pod to prevent wastage or mess.
How long does the Vaporesso GTX GO 80 device take to charge?
Your GTX GO 80 should reach full charge in 90 minutes.
What is the difference between Mouth-to-Lung (MTL) and Direct-Lung (DL) vaping?
In Mouth-to-Lung vaping you inhale vapour and hold it in your mouth for a moment before inhaling again for the vapour to reach your lungs. In Direct-Lung vaping you inhale in one continuous breath into your lungs. See MTL v DL for more information.
Can you wash the GTX POD 26?
Yes. Remove the pod from the device, and empty out any e-liquid. Wash the pod out with warm (not boiling) water. Ensure that the pod is fully dry before using it again.
You can also clean the connections out with cotton to remove dust.
How long does the coil last?
Coil life depends on many factors, including how long you puff for, the e-liquid you use and the wattage you use your coil at. Low resistance coils, which are used at higher wattages, will not last as long as high resistance coils.
You can extend coil life by:
- Priming the coil before usage
- Using e-liquid with the right VG:PG ratios
- Not going above the recommended wattage
- Topping up your tank so that the coil never dries out
With care, the included 0.2ohm coil should last several days before needing to be replaced.