The Innokin Coolfire Z80 delivers both great flavour and long coil life thanks to its Refresh feature and F0 mode. Refresh allows you to prime the coil between uses and F0 utilises new thermodynamic heating technology to improve the flavour of your e-liquid and increase coil life. (See more about these modes in the FAQs below).
The 80W Coolfire Z80 device is powered by an external 18650 battery (not included). The convenient external battery design means that should the battery run low, you can simply swap for a new battery and carry on vaping with no interruption.
All important device data including wattage and battery life is displayed on the Coolfire Z80's in-built screen. The screen has a choice of two options - pro and minimalist which displays more or less detailed data depending on what you prefer.
Available in 4 options, the Coolfire Z80 offers a choice of stylish colours and textures - with a metallic Zinc Alloy frame finished with soft leather or suede.
The Coolfire Z80 kit includes a 2ml Innokin Zenith II tank, compatible with Innokin Z coils. While, the Zenith II tank works best for MTL vaping, the wide range of coil resistances available and the choice of both a narrow and wider drip tip means it is also able to support RDL & DL vaping. (See more about these vaping styles in the FAQs below).
The Zenith II tank's adjustable airflow ring also allows you to precisely control the air intake for an airier or more restricted vape and more or less intense flavour & nicotine hits.
For extra versatility, both the Coolfire Z80 mod and Zenith II tank have 510 connections meaning they can both be paired with other tanks and mods.
COMPATIBLE E-LIQUIDS & COILS
This device and the included tank can be used with both VG:PG 50:50 e-liquid and high VG e-liquid.
The Coolfire Z80 with Zenith II tank is compatible with Innokin Z coils.
- High VG e-liquid: Use 0.3ohm (included), 0.48ohm or 0.5ohm (not included) Z coils
- 50:50 e-liquid: Use 0.8ohm (included), 1.0ohm, 1.2ohm or 1.6ohm (not included) Z coils
RECOMMENDED WATTAGES
- 0.8ohm Z Coil: 15 - 18W
- 0.3ohm Z Coil: 30 - 40W
Who is the Innokin Coolfire Z80 for?
The Coolfire Z80 is best suited to intermediate to advanced vapers who are looking for a versatile mod and tank kit that offers great flavour and a wide choice of vaping styles, coils and e-liquids.
FAQS
What e-liquid can you use with the Innokin Coolfire Z80 kit?
When used with the included Zenith II tank and 0.8ohm coil, the Coolfire Z80 kit is best used with VG:PG 50:50 e-liquids or nicotine salts.
When used with the included 0.3ohm coils it is best used with high VG e-liquids with a VG:PG ratio of around 70:30.
What does Refresh mean?
The Refresh feature can be activated with a button to manually reset the coil between uses for better wicking which prolongs coil life.
What is F0 mode?
F0 mode is a new form of thermodynamic heating that uses alternating current to produce a continuous waveform across the coil while you vape for improved flavour and coil life.
What is the difference between Mouth-to-Lung (MTL), Direct-Lung (DL) and restricted Direct-Lung (RDL) vaping?
In Mouth-to-Lung vaping you inhale vapour and hold it in your mouth for a moment before inhaling again for the vapour to reach your lungs. In Direct-Lung (DL) vaping you inhale in one continuous breath into your lungs.
With restricted Direct-Lung vaping, you inhale in the same way as DL, but you don't require as much airflow over the coil. The flavour experience is similar to DL, but the throat hit is more similar to MTL. See MTL v DL for more information.
How long does the coil last?
Coil life depends on many factors, including how long you puff for, the e-liquid you use and the wattage you use your coil at. Low resistance coils, which are used at higher wattages, will not last as long as high resistance coils.
You can extend coil life by:
- Priming the coil before usage
- Using e-liquid with the right VG:PG ratios
- Not going above the recommended wattage
- Topping up your tank so that the coil never dries out
With care, the 0.3ohm coil should last several days, while the 0.8ohm coil should last up to a week or more before needing to be replaced.