Obelisk Tank by Geekvape

Name: Obelisk Tank
Brand: Geekvape
SKU: CL-OBL-MES-XXX-XXX
Price: 12.49 GBP
Availability: InStock

Full DescriptionDescription What's in the box Tech Spec

Customer Reviews

The Geekvape Obelisk tank is a 2ml, sub-ohm tank designed for use with the Zeus coil range.

2ml tank for the Geekvape Obelisk
510 Connection
Works with Geekvape Zeus coil range (not included)
Push-fit coil design
Leakproof, childproof design
Sliding, top-fill
Wide bore drip tip
Slotted bottom airflow control

The Geekvape Obelisk tank's 510 connection means it can be paired with most vape mods for sub-ohm, Direct-Lung vaping. (See more in the FAQs below).

The tank's convenient push-fit design makes switching coils super simple and eliminates the need for fiddly, time-consuming coil changes.

More versatility is offered by the tank's bottom slotted airflow control. Simply adjust the airflow to get an airier or more restricted vape depending on which you prefer.

The transparent design of the tank means you can easily keep track of your e-liquid levels to prevent you from running out and burning the coil. When it is time to refill, the sliding top filling design makes it simple and prevents any pesky mess or wastage.

COMPATIBLE COILS & E-LIQUIDS

The Geekvape Obelisk tank works with the Geekvape Zeus coil range (not included) and is recommended for use with high VG e-liquids (VG:PG 70:30 and above).

FAQs

What e-liquid can you use in the Geekvape Obelisk tank?

When used with Geekvape 0.4ohm Z1 and 0.2ohm Z2 coils, the Obelisk tank is best used with high VG e-liquids with a VG:PG ratio of around 70:30 or 80:20.

What is sub-ohm vaping?

Sub-ohm vaping refers to vaping with a coil with an ohm (ohm) rating below 1.0. When pairing low resistance coils with high powered devices and high VG e-liquids, this method of vaping will produce thicker, denser vapour clouds, more intense flavour and stronger nicotine hit.

Do note that while sub-ohm originally referred to vaping with any coil less than 1ohm, vape technology has advanced and some modern MTL coils often have a resistance of less than 1ohm.

See The Beginners Guide to Sub-Ohm Vaping for more information.

What is the difference between Mouth-to-Lung (MTL) and Direct-Lung (DL) vaping?

In Mouth-to-Lung vaping you inhale vapour and hold it in your mouth for a moment before inhaling again for the vapour to reach your lungs. In Direct-Lung vaping you inhale in one continuous breath into your lungs. See MTL v DL for more information.

What's in the box

1 x Geekvape Obelisk Tank (2ml)
Coils not included

Tech Spec

Capacity: 2ml
Filling: Top fill
Device Compatibility: Geekvape Obelisk
Coil Compatibility: Zeus coil range

What Our Customers Say

Product delivery rates for the UK
Order Value	Delivery Method	Price
Under £15	Tracked 48 Tracked 24	£2.99 £3.99
£15 - £20	Tracked 48 Tracked 24	£1.99 £2.99
Over £20	Tracked 24	FREE

The rates listed above are for delivery to addresses within the UK. For more information view our Delivery and Returns policy

Tanks & pods: Replaceable coil

Follow these simple steps to get the most out of your replaceable-coil tank or pod.

When adding a new coil, ‘prime’ the coil by allowing e-liquid to soak in for five minutes before use.
When device is switched on, only press fire button when inhaling.This avoids condensation in the pod or tank.
Push/screw coils in firmly but don’t over-tighten.
Use the correct power settings for the coil you are using. You will usually find this on your manual or on the coil itself.
Keep some e-liquid in the pod or tank at all times. The key here is to ensure the coil is covered with e-liquid so it does not dry out.
When travelling on a plane, empty tanks before use, as changes in air pressure can cause leakage.

Pods: Fixed coil

Follow these simple steps to get the most out of your fixed-coil pod.

When using a new pod for the first time, allow e-liquid to soak in for five minutes before using.
When device is switched on, only press fire button when inhaling.This avoids condensation in the pod or tank.
Keep some e-liquid in the pod at all times. The key here is to ensure the coil is covered with e-liquid so it does not dry out.
When travelling on a plane, empty pods before use, as changes in air pressure can cause leakage.

Keeping a tank or pod clean

It can be a good idea to keep the airway clear, especially if you spend a lot of time outside or if airflow is affected. If you have a removable mouthpiece, remove and blow through it to clear it. You can also push some kitchen towel through it to further clean the mouthpiece.

Occasionally cleaning your tank can improve performance. To clean, first, remove all e-liquid from the tank, and the coil if applicable. Wash the tank through with warm but not boiling water. Allow the tank to dry completely before using it again, as water can affect the quality of your vape.

Helpful guides

At E-Cigarette Direct we pride ourselves on providing you with superb after-sales support, and aim to provide rapid replacements for any faulty device under warranty. This page details the warranties you get with your device, and how to get a replacement.

Charging Equipment

Your charger comes with a 12 month warranty.

Batteries

All mods and batteries are under warranty for three months.

Clearomiser / Tanks

All clearomisers (tanks) with the exception of CE5 clearomisers are under warranty for six months. CE5 clearomisers (tanks) are under warranty for one month.

Please note - these warranties do not apply to the coil within a clearomiser or tank which is a consumable product as below.

Coils

Coils are a consumable product, and as such, will be replaced only if faulty on arrival. Please let us know within 5 days of receipt if your new coil does not work.

What does your warranty mean?

We guarantee that your device is, and will remain, free from defects for the period of the warranty. Please note - this applies to faulty products, and not accidental damage (e.g. dropping on a hard floor!)

The above warranties are subject to our terms and conditions. Please see our full warranty information for further details.

What if the warranty has run out?

We're still here to help! Many problems can be diagnosed and solved (or we can point you towards one of our helpful guides), so send us an email, give us a call for advice or pop into one of our stores for face-to-face support and help.

How do I get a replacement?

In the unlikely event you have a problem with your device, just contact our friendly customer service team on [email protected].

You’ll need to return the item (we can cover a free delivery charge). If we are unable to diagnose and solve your issue, we’ll send you a replacement by Royal Mail First Class. It helps if you have your order number, but if not our team should be able to find your order using your email address.