The NX75-Z is a powerhouse of a mod, with adjustment from 1-75W.
The Aspire NX75-Z quick select button and combos enable you to quickly switch between modes, saving you time and reducing fiddle!
Press the W and T buttons to switch between wattage and temperature modes. Press the T button to select the type of coil you are using (Ti, Ni, SS and TCR (M1,M2,M3).
Don’t wish to draw attention to yourself when vaping? The NX75 may not be the smallest mod around (for that we recommend a device like the Mini Volt) but it does enable you to switch off the display in the dark - perfect for vapers who wish to be discreet.
Custom Firing Button Profile and Heat Ramp Up
Want your vapour faster or slower? Heat ramp up refers to the speed at which power is delivered to your coil - increase the speed and you get more vapour faster.
Now, with the NX75-Z you can customise your heat ramp up speed, and even set the wattage for each second of your vape, giving you incredible control over your vape!
Temperature Control: Automatic Coil Resistance Detections
When you’re in TC mode, there’s no need to enter the resistance of the coil. The NX75 will automatically detect the coil resistance, making your life that little bit easier!
Advanced vapers (and those looking to take their vaping to the next level) may find the TCR mode helpful.
We know that different coils at the same resistance level can react differently to the same power levels. One reason for that is the variations in alloys used in the construction of your coil.
TCR (or the temperature coefficient of resistance) allows you to make your device as accurate as possible by accounting for variations in the material of your coil.
Child Lock and Password Functionality
Worried about the little ones getting their hands on your mod? Aspire provide peace of mind with their child lock function. Simply press (W) and (-) to enter child lock mode, and then use the (+) or (-) buttons to set a password.
Easily customise the display with just a few clicks of the button! Put your name on it, or be childish and put something silly (don’t forget to change this if you are using it at work!)
To customise simply press (T) and (-) together to bring up the menu. Use the (+) and (-) buttons to navigate the menu, W to delete, T to change case, fire to select and T and (-) to exit again.
In The Box
- 1 x NX75-Z Mod
- 1 x Micro USB charging cable
- 1 x User Manual
- 1 x Warranty Card
- 1 x Sticker of Authenticity
Specification & Features
- Wattage range: 1-75W
- Output Voltage Range: 0.00-8.50V
- Resistance parameters: 0.1ohm - 3.5 ohm (both wattage and tc modes)
- Continuous fire time: Adjustable from 5s-15s
- Firmware updates available via micro-usb ports
- Dimensions: 22.5 X 36.8 X 75mm
- Battery required: 3.7v single 18650 high rate discharge battery
- TC range: 200-600F/100-315C
- Automatic cut off
- Short circuit protection
- Low resistance protection
- Overheat protection
- Overcharge protection
- Over discharge protection
- Pass through charging (note that charging while vaping will shorten the life of the battery)
- Stealth vaping mode
- Heat ramp up adjustment
- TCR functionality
- Automatic coil resistance in TC mode
- Child lock
- Name personalisation (‘change logo function’)