The Geekvape Z Max tank is designed for flavour-filled, Direct-Lung vaping that creates dense vapour clouds. An ultra-versatile tank, its threaded 510 connection means it can be paired with a wide range of mods.
The 2ml tank utilises both Direct Top and High-Dynamic Top-to-Bottom airflow for maximum airflow production. Air enters the tank via side inlets to reach the coil more quickly and efficiently. It then flows top-to-bottom throughout the tank to ensure the tank is filled with as much air as possible.
The airflow can be precisely adjusted using the rotating airflow ring to achieve an airier, looser or tighter, more restricted vape depending on what you prefer.
Filling the Z Max is made quick and simple through the convenient top-filling ports and can be performed while the tank is attached to the device. Simply remove the top cap and fill with e-liquid through the filling holes. There is no need to worry about any e-liquid escaping as the Z Max tank has been designed with industry-leading Z-level leakproof technology that eliminates mess and e-liquid wastage.
For a flavour-filled vape and large cloud production, the Z Max tank uses Geekvape M (Max) Series coils. M Series coils are large coils designed to maximise the contact area between the coil and e-liquid to enhance flavour and create clouds.
The Geekvape Z Max tank is available in 6 striking colours to suit your personal style and fit the aesthetic of your chosen mod.
The Geekvape Z Max tank works with Geekvape M Series coils.
M Series 0.14Ω: 60 - 80W
M Series 0.2Ω: 70 - 85W
Who is the Geekvape Z Max tank for?
The Z Max tank is a great option for Direct-Lung/sub-ohm vapers who prioritise large clouds and intense flavour. (See more about Direct-Lung and sub-ohm vaping in the FAQs below.)
What e-liquid can you use in the Geekvape Z Max tank?
When used with the included 0.14Ω and 0.12Ω coils, the Z Max tank is best used with high VG e-liquids with a VG:PG ratio of around 70:30 or higher.
Can you wash a Z Max tank?
Yes. Remove the tank from the device and empty out any e-liquid. Wash the tank out with warm (not boiling) water. Ensure that the tank is fully dry before using it again.
You can also clean the connections out with cotton to remove dust.
What is the difference between Mouth-to-Lung (MTL) and Direct-Lung (DL) vaping?
In Mouth-to-Lung vaping you inhale vapour and hold it in your mouth for a moment before inhaling again for the vapour to reach your lungs. In Direct-Lung vaping you inhale in one continuous breath into your lungs. See MTL v DL for more information.
What is sub-ohm vaping?
Sub-ohm vaping refers to vaping with a coil with an ohm (Ω) rating below 1.0. When pairing low resistance coils with high powered devices and high VG e-liquids, this method of vaping will produce thicker, denser vapour clouds, more intense flavour and stronger nicotine hit.
Do note that while sub-ohm originally referred to vaping with any coil less than 1Ω, vape technology has advanced and some modern MTL coils often have a resistance of less than 1 Ω.
See The Beginners Guide to Sub-Ohm Vaping for more information.
How long does the coil last?
Coil life depends on many factors, including how long you puff for, the e-liquid you use and the wattage you use your coil at. Low resistance coils, which are used at higher wattages, will not last as long as high resistance coils.
You can extend coil life by:
- Priming the coil before usage
- Using e-liquid with the right VG:PG ratios
- Not going above the recommended wattage
- Topping up your tank so that the coil never dries out
With care, the included M Series coils should last several days.
- Dimensions: 32 x 52.85mm
- Capacity: 2ml
Whats in the Box?
- 1 x Geekvape Z Max Tank (2ml)
- 1 x M Series 0.14Ω Coil
- 1 x M Series 0.2Ω Coil
- 1 x Spare Glass Tube (2ml)
- 1 x Spare Parts Pack
- 1 x Drip Tip
At E-Cigarette Direct we pride ourselves on providing you with superb after-sales support, and aim to provide rapid replacements for any faulty device under warranty. This page details the warranties you get with your device, and how to get a replacement.
Your charger comes with a 12 month warranty.
All mods and batteries are under warranty for three months.
All clearomisers (tanks) with the exception of CE5 clearomisers are under warranty for six months. CE5 clearomisers (tanks) are under warranty for one month.
Please note - these warranties do not apply to the coil within a clearomiser or tank which is a consumable product as below.
Coils are a consumable product, and as such, will be replaced only if faulty on arrival. Please let us know within 5 days of receipt if your new coil does not work.
What does your warranty mean?
We guarantee that your device is, and will remain, free from defects for the period of the warranty. Please note - this applies to faulty products, and not accidental damage (e.g. dropping on a hard floor!)
The above warranties are subject to our terms and conditions. Please see our full warranty information for further details.
What if the warranty has run out?
We're still here to help! Many problems can be diagnosed and solved (or we can point you towards one of our helpful guides), so send us an email, give us a call for advice or pop into one of our stores for face-to-face support and help.
How do I get a replacement?
In the unlikely event you have a problem with your device, just contact our friendly customer service team on [email protected]
You’ll need to return the item (we can cover a free delivery charge). If we are unable to diagnose and solve your issue, we’ll send you a replacement by Royal Mail First Class. It helps if you have your order number, but if not our team should be able to find your order using your email address.
Delivery & Returns
Hassle Free Returns plus Free Delivery On Orders Over £15
Usually next working day*
Usually 2-4 working days*
Usually next working day (if ordered before 4pm)
Up to £14.99 £3.99 £2.49 £7.99 £15 to £19.99 £1.99 FREE £7.99 £20 + FREE - £7.99
*Estimated delivery time based on working days and does not include weekends or Bank Holidays. Delivery times vary depending on location so please take into account typical service expectations in your area.
Unfortunately, we can no longer deliver to EU addresses outside the UK due to new EU regulations.
Hassle-Free Returns - & 90 Days to Change Your Mind
Need to return an item? We aim to make the process as easy as possible (it’s also free!)
Just send an email to our friendly customer service team on [email protected], give us a call on 01792 852843 or contact us on chat.
When can I make a return?
You have a faulty product under warranty.
You can see our full returns policy in our terms and conditions.
Not in the UK?
You can see the full list of countries we deliver to here.
Using Your Tank: Best Practice
Follow these simple steps to get the most out of your tank.
- When filling, always avoid getting e-liquid in the centre tube.
- Don’t hold down the button before inhaling.
- When attaching the coil, screw it in firmly but don’t over-tighten.
- Make sure you use the right power settings. If unsure, check the manual or start with a low power setting and work your way up till you get the right hit.
How To Maximise the Life Of Your Coils
Always allow your e-liquid to soak into your coil for at least five minutes before using it. This will help prevent your coil from burning out.
When you have a more powerful coil, or one with more wicking material, it’s also a good idea to prime it by applying a few drops of e-liquid into the coil holes before filling.
Once you’re using the device, it is important to keep your tank topped up. If the e-liquid gets too low and the coil is exposed, the coil can burn out.
For more advice, see Seven Easy Ways to Stop Your Coil From Burning Out: