The original Zenith tank by Innokin, also the result of a collaboration, with Phil Busardo, was designed to be super simple to use, but this simplicity was reflected in the design and it did look a bit basic. The Innokin Zlide, in comparison, looks sleeker, with a large open window to view e-liquid levels and a subtle curve on the bottom of the drip tip for a more sophisticated look.
Innokin Zlide Coils
The Innokin Zlide Tank comes with two coils, but is also compatible with all Zenith coils. The 0.48 ohm coil is built with Innokin’s plex3d mesh coil. Mesh coils utilise a interlinking metal to maximise the surface area of the coil, allowing for more consistent flavour and vapour as well as an improved coil life. For more information, see our guide to mesh coils.
The 1.6 ohm coil is designed for use at lower wattage and offers a cooler vape more suitable for mouth to lung vaping.
Simple Coil Replacement
The Innokin Zlide also comes with one of our favourite coil features - the ability to change the coil without having to open the whole tank and risk spilling e-liquid. This features allows you to replace the coil by simply screwing out the old coil and screwing in a new coils.
The Zlide comes with easy top filling. Simply remove the top cap and slide the top of the tank to the side to open the filling port.
COMPATIBLE E-LIQUIDS & COILS
This tank can be used with both VG:PG 50:50 e-liquid and High VG e-liquid.
The Zlide tank is compatible with Innokin Zenith (Z) coils.
- High VG e-liquid: Use 0.3Ω, 0.48Ω or 0.5Ω Zenith coils
- 50:50 e-liquid: Use 0.8Ω, 1.0Ω, 1.2Ω or 1.6Ω Zenith coils
Who is the Innokin Zlide Tank for?
The ease of use of the Zlide means it’s ideal for new and intermediate vapers, while the option of using a lower resistance mesh coil means it also great for vapers who prefer a bit more vapour.
As with all vape tanks, it’s best to prime the coil before using for the first time. Fill the tank and allow to stand for five minutes before using a new coil for the first time. You can also drip a little e-liquid into the coil ports before screwing into the tank. The video below goes into more detail:
The Zlide tank is compatible with most vape devices with a 510 connection, and with all coils in the Z line by Innokin.
- Capacity: 2ml
- Adjustable airflow
- Top fill – childproof cap
- Easy coil replacement
- Replaceable tank glass
- Redesigned replaceable top cap
- More cost effective version of the Zenith Tank
- Choice of plex3d or kanthal coils
- Also compatible with all Zenith-range coils
In the box
- One Zenith-PLEX3D 0.48 Ohm Kanthal 3D mesh coil
- One 1.6 Ohm Kanthal coil
- Two mouthpieces
- Replacement glass tank section
- Replacement silicone seal
- Replacement o-rings
- QR code with access to free tutorial videos
At E-Cigarette Direct we pride ourselves on providing you with superb after-sales support, and aim to provide rapid replacements for any faulty device under warranty. This page details the warranties you get with your device, and how to get a replacement.
Your charger comes with a 12 month warranty.
All mods and batteries are under warranty for three months.
All clearomisers (tanks) with the exception of CE5 clearomisers are under warranty for six months. CE5 clearomisers (tanks) are under warranty for one month.
Please note - these warranties do not apply to the coil within a clearomiser or tank which is a consumable product as below.
Coils are a consumable product, and as such, will be replaced only if faulty on arrival. Please let us know within 5 days of receipt if your new coil does not work.
What does your warranty mean?
We guarantee that your device is, and will remain, free from defects for the period of the warranty. Please note - this applies to faulty products, and not accidental damage (e.g. dropping on a hard floor!)
The above warranties are subject to our terms and conditions. Please see our full warranty information for further details.
What if the warranty has run out?
We're still here to help! Many problems can be diagnosed and solved (or we can point you towards one of our helpful guides), so send us an email, give us a call for advice or pop into one of our stores for face-to-face support and help.
How do I get a replacement?
In the unlikely event you have a problem with your device, just contact our friendly customer service team on [email protected]
You’ll need to return the item (we can cover a free delivery charge). If we are unable to diagnose and solve your issue, we’ll send you a replacement by Royal Mail First Class. It helps if you have your order number, but if not our team should be able to find your order using your email address.
Delivery & Returns
Hassle Free Returns plus Free Delivery On Orders Over £15
Usually next working day*
Usually 2-4 working days*
Up to £14.99 £3.99 £2.49 £15 to £19.99 £1.99 FREE £20 + FREE -
*Estimated delivery time based on working days and does not include weekends or Bank Holidays. Delivery times vary depending on location so please take into account typical service expectations in your area.
Unfortunately, we can no longer deliver to EU addresses outside the UK due to new EU regulations.
Hassle-Free Returns - & 90 Days to Change Your Mind
Need to return an item? We aim to make the process as easy as possible (it’s also free!)
Just send an email to our friendly customer service team on [email protected], give us a call on 01792 852843 or contact us on chat.
When can I make a return?
When you have an unwanted present or have changed your mind - you’ve got 90 days to decide! Please note this only applies when you have not used the product, and it is in a resalable condition.
You have a faulty product under warranty.
You can see our full returns policy in our terms and conditions.
Not in the UK?
You can see the full list of countries we deliver to here.