-
The Vaporesso iTank features a delicate yet durable spacecraft-inspired mechanical design and provides big flavour and big clouds thanks to its innovative Turbo airflow system.
Three inlets at the bottom of the iTank allow air to enter and fully circulate the tank and coil for a smooth, flavour-full vape and thick vapour. The tank’s adjustable airflow ring also allows you to tailor your vape between more airy or restricted.
A 510 threaded connection allows the iTank to be paired with most vape mods and works best with 60W+ devices.
The iTank’s convenient push-fit coil installation makes replacing coils simple while the top filling design makes topping up the tank clean and easy with no need to remove it from the device.
The Vaporesso iTank can also be found as part of the Target 100, Target 200 and Target 80 with iTank kits.
Recommended E-liquids & Coils
The Vaporesso iTank works with GTi coils and is recommended for use with high VG e-liquids.
Recommended Wattages
- GTi 0.2Ω mesh coil: 60 - 75W
- GTi 0.4Ω mesh coil: 50 - 60W
FAQs
What e-liquid can you use with the Vaporesso iTank?
The iTank and GTi coils are best used with high VG e-liquids with a VG:PG ratio of 70:30 and above.
Can you wash a Vaporesso iTank?
Yes. Remove the tank from the device, remove the coil and empty out any e-liquid. Wash the tank out with warm (not boiling) water and ensure that it is fully dry before using it again. You can also clean the connections out with cotton to remove dust.
How long do the coils last?
Coil life depends on many factors, including how long you puff for, the e-liquid you use and the wattage you use your coil at. Low resistance coils, which are used at higher wattages, will not last as long as high resistance coils.
You can extend coil life by:
- Priming the coil before usage
- Using e-liquid with the right VG:PG ratios
- Not going above the recommended wattage
- Topping up your tank so that the coil never dries out
With care, the included GTi coils should last several days before needing to be replaced.
Specs
- Capacity: 2ml
- Connection: Threaded 510
- Coil compatibility: Vaporesso GTi
-
- 1 x Vaporesso iTank (2ml)
- 1 x GTi 0.2Ω Mesh Coil (60-75W)
- 1 x GTi 0.4Ω Mesh Coil (50-60W)
- 1 x Extra Glass Tube
- 3 x O-ring
- 1 x User Manual
-
-
At E-Cigarette Direct we pride ourselves on providing you with superb after-sales support, and aim to provide rapid replacements for any faulty device under warranty. This page details the warranties you get with your device, and how to get a replacement.
Charging Equipment
Your charger comes with a 12 month warranty.
Batteries
All mods and batteries are under warranty for three months.
Clearomisers/Tanks
All clearomisers (tanks) with the exception of CE5 clearomisers are under warranty for six months. CE5 clearomisers (tanks) are under warranty for one month.
Please note - these warranties do not apply to the coil within a clearomiser or tank which is a consumable product as below.
Coils
Coils are a consumable product, and as such, will be replaced only if faulty on arrival. Please let us know within 5 days of receipt if your new coil does not work.
What does your warranty mean?
We guarantee that your device is, and will remain, free from defects for the period of the warranty. Please note - this applies to faulty products, and not accidental damage (e.g. dropping on a hard floor!)
The above warranties are subject to our terms and conditions. Please see our full warranty information for further details.
What if the warranty has run out?
We're still here to help! Many problems can be diagnosed and solved (or we can point you towards one of our helpful guides), so send us an email, give us a call for advice or pop into one of our stores for face-to-face support and help.
How do I get a replacement?
In the unlikely event you have a problem with your device, just contact our friendly customer service team on [email protected]
You’ll need to return the item (we can cover a free delivery charge). If we are unable to diagnose and solve your issue, we’ll send you a replacement by Royal Mail First Class. It helps if you have your order number, but if not our team should be able to find your order using your email address.
-
Hassle Free Returns plus Free Delivery On Orders Over £15
Tracked 24
Usually next working day*Tracked 48
Usually 2-4 working days*Up to £14.99 £3.99 £2.49 £15 to £19.99 £1.99 FREE £20 + FREE - *Estimated delivery time based on working days and does not include weekends or Bank Holidays. Delivery times vary depending on location so please take into account typical service expectations in your area.
Unfortunately, we can no longer deliver to EU addresses outside the UK due to new EU regulations.
Hassle-Free Returns - & 90 Days to Change Your Mind
Need to return an item? We aim to make the process as easy as possible (it’s also free!)
Just send an email to our friendly customer service team on [email protected], give us a call on 01792 852843 or contact us on chat.
When can I make a return?
-
When you have an unwanted present or have changed your mind - you’ve got 90 days to decide! Please note this only applies when you have not used the product, and it is in a resalable condition.
-
You have a faulty product under warranty.
You can see our full returns policy in our terms and conditions.
Not in the UK?
You can see the full list of countries we deliver to here.
-
-
Using Your Tank: Best Practice
Follow these simple steps to get the most out of your tank.
- When filling, always avoid getting e-liquid in the centre tube.
- Don’t hold down the button before inhaling.
- When attaching the coil, screw it in firmly but don’t over-tighten.
- Make sure you use the right power settings. If unsure, check the manual or start with a low power setting and work your way up till you get the right hit.
Also see: 14 Ways to Stop Your Clearomiser from Leaking.
How To Maximise the Life Of Your Coils
Always allow your e-liquid to soak into your coil for at least five minutes before using it. This will help prevent your coil from burning out.
When you have a more powerful coil, or one with more wicking material, it’s also a good idea to prime it by applying a few drops of e-liquid into the coil holes before filling.
Once you’re using the device, it is important to keep your tank topped up. If the e-liquid gets too low and the coil is exposed, the coil can burn out.
For more advice, see Seven Easy Ways to Stop Your Coil From Burning Out: