Vision Spinner 2 Variable Voltage E-Cig Battery
Version 2 of the popular Vision Spinner, this device features an increased 1600mAh battery capacity for increased time between charges.
The Vision Spinner 2 also comes with a rotatable bottom dial with stepped voltage adjustment of 3.3v, 3.8v, 4.3v & 4.8v - allowing you to adjust your Spinner 2 for your perfect vape.
Meanwhile, a built in power indicator lets you know at all times how much battery charge is left:
- White: 60% - 100% charge
- Blue: 30% - 60% charge
- Orange: 0% - 30% charge
The Vision Spinner 2 incorporates safety features for peace of mind, including short circuit protection. For full guidance on how to use the device see the Vision Spinner Tutorial.
Recommended for use with
Who is it for?
The Vision Spinner 2 is ideal for people who like a simple to use device, or those who prefer eGo fit batteries, while retaining the ability to adjust voltage.
- Length: 124.5mm
- Diameter: 16.5mm
- Capacity: 1600mAh
- Thread: eGo
Whats in the Box?
- 1 x Vision Spinner 2
- 1 x Manual
At E-Cigarette Direct we pride ourselves on providing you with superb after-sales support, and aim to provide rapid replacements for any faulty device under warranty. This page details the warranties you get with your device, and how to get a replacement.
Your charger comes with a 12 month warranty.
All mods and batteries are under warranty for three months.
All clearomisers (tanks) with the exception of CE5 clearomisers are under warranty for six months. CE5 clearomisers (tanks) are under warranty for one month.
Please note - these warranties do not apply to the coil within a clearomiser or tank which is a consumable product as below.
Coils are a consumable product, and as such, will be replaced only if faulty on arrival. Please let us know within 5 days of receipt if your new coil does not work.
What does your warranty mean?
We guarantee that your device is, and will remain, free from defects for the period of the warranty. Please note - this applies to faulty products, and not accidental damage (e.g. dropping on a hard floor!)
The above warranties are subject to our terms and conditions. Please see our full warranty information for further details.
What if the warranty has run out?
We're still here to help! Many problems can be diagnosed and solved (or we can point you towards one of our helpful guides), so send us an email, give us a call for advice or pop into one of our stores for face-to-face support and help.
How do I get a replacement?
In the unlikely event you have a problem with your device, just contact our friendly customer service team on [email protected]
You’ll need to return the item (we can arrange pick up free of charge). If we are unable to diagnose and solve your issue, we’ll send you a replacement by Royal Mail First Class. It helps if you have your order number, but if not our team should be able to find your order using your email address.
Delivery & Returns
Hassle Free Returns plus Free Delivery On Orders Over £15
Delivery Prices and Speeds
Royal Mail 24
£2.99 or FREE for orders over £15
1-7 working days if purchase completed before 5pm.
Parcels ship Monday - Friday excluding bank holidays. 95% of orders arrive next day.
- Signature required for orders over £100.00.
- Orders over £100.00 are sent Royal Mail Tracked 24.
Royal Mail Tracked 24
£3.99 or £1.49 for orders between £15 to £100 or FREE for orders over £100
Next working day.
Parcels ship Monday - Friday excluding bank holidays.
- Tracked - signature required
Depends on country
Parcels ship Monday - Friday excluding bank holidays.
Delivery times 9-21 days depending on country.
See here for countries we deliver to.
Unfortunately, we can no longer deliver to addresses outside the UK but in the EU due to new EU regulations.
Hassle-Free Returns - & 90 Days to Change Your Mind
Need to return an item? We aim to make the process as easy as possible (it’s also free!)
There’s no need to fill in a complicated form - just send an email to our friendly customer service team on [email protected], give us a call on 01792 852843 or contact us on chat.
When can I make a return?
When you have an unwanted present or have changed your mind - you’ve got 90 days to decide! Please note this only applies when you have not used the product, and it is in a resalable condition.
You have a faulty product under warranty.
You can see our full returns policy in our terms and conditions.
Not in the UK?
We also ship internationally, including New Zealand. You can see the full list of countries we deliver to here.
How to Use The Vision Spinner 2
1. How to Turn The Vision Spinner On and Off
As with other e-cigarette batteries, simply click the V button five times to turn the battery on or off.
2. How to Charge the Vision Spinner
i. What Charger To Use
Like all ecig batteries, the Vision Spinner must be charged using a compatible e-cig charger. The Vision 1650 requires a standard USB eGo charger such as the Halo Tank Charger use with a wall chargers such as this Veho device.
Use of non-standard chargers such as iPhone or iPad chargers invalidates the warranty, may lead to the damage or destruction of the battery and unwanted consequences. See battery safety below for more information.
ii. Charging Times
Like other e-cigarette batteries, you should always give your Vision Spinner an initial charge of at least 4 hours, even if it appears fully charged or is already holding some charge. This conditions the battery and ensures a longer battery life overall. Once the battery is conditioned, you will typically need to charge a low battery for three to four hours.
If the battery does not charge immediately, tap the button once to activate charging.
iii. What The Charging Lights Mean
Red: Indicates the battery needs charging, or that the device is currently charging.
Green: Indicate the battery is fully charged (the light will turn from red to green when fully charged.)
After plugging in, when the green light turns red it should flash a few times, then stay red until it's charged and will then turn back to green. The flashing is the charger deciding how much charge it needs. In addition, the V on the Spinners fire button will also flash three times when fully threaded on, after the three flashes the fire button ("V") will light up when the device is charging.
iv. How The Built In Power Indicator Works
In addition, the Vision Spinner also comes with a handy charging light, which will help you avoid unexpectedly running out of power! The lights are as follows:
3. How to Use the Variable Voltage Function on the Vision Spinner 2
Beginners can often be put off by the phrase variable voltage, but with the Vision Spinner 1650 it simply couldn’t be easier.
The Vision II features four different voltages:
- 3.3 V
- 3.8 V
- 4.3 V
- 4.8 V
To change the voltage, simply rotate the spinner at the end of the device until the red line aligns with the voltage required.
A higher voltage will lead to a greater throat hit and increased vapor production. In addition, you will find that different voltages suit different flavours - for example, I always like to use a lower voltage when vaping menthol e-liquid. Again, do check out our Battery Tutorial if you need further explanation.
4. What is the Vision Spinner compatible with?
The Vision Spinner fits all 510/Ego threaded clearomisers. However, we recommend it for use with the Aspire Bottom Dual Coil Clearomiser or Aspire Nautilus Mini. Not only does the additional power work well with these clearomisers, they also allow you to maximise the potential of variable voltage batteries by using different resistance atomisers in the different clearomisers.
5. What Resistance (Ohms) Should You Use With The Vision Spinner 2
Of course, to get the perfect combination for you, you will want to experiment with different voltages and atomiser resistances. (If you haven’t used different resistance atomisers before, make sure you check out our Ultimate Guide to Clearomisers).
However, if you are using the device with a clearomiser such as the Aspire Bottom Dual Clearomiser, we have found the following voltage/resistance combinations work well.
- 3.3 V: Any
- 3.8 V: 2.1Ω, 1.8Ω, 1.6Ω
- 4.3 V: 2.1Ω, 1.8Ω
- 4.8 V: Use with caution, as this voltage can quickly burn out a coil. We recommend a higher resistance than 2.1Ω if using this voltage.
The Vision Spinner’s upgraded protection system automatically detects short circuits. If this happens the battery will flash three times and then power off until circuits return to normal.
In addition, the battery will automatically cut out if the button is held down for 8 seconds or longer and return to normal shortly after.
However, as with all e-cig batteries, the Vision Spinner v2 should be treated with care and respect:
- Always charge batteries on a suitable charger. (In a recent ECITA meeting, we were advised that EVERY battery incident that ECITA knew of had taken place because the incorrect charger - often an apple charger - had been used with electronic cigarette batteries).
- Never leave charging batteries unattended.
- Always charge batteries on a hard surface.