The Geekvape Obelisk tank's 510 connection means it can be paired with most vape mods for sub-ohm, Direct-Lung vaping. (See more in the FAQs below).
The tank’s convenient push-fit design makes switching coils super simple and eliminates the need for fiddly, time-consuming coil changes.
More versatility is offered by the tank’s bottom slotted airflow control. Simply adjust the airflow to get an airier or more restricted vape depending on which you prefer.
The transparent design of the tank means you can easily keep track of your e-liquid levels to prevent you from running out and burning the coil. When it is time to refill, the sliding top filling design makes it simple and prevents any pesky mess or wastage.
COMPATIBLE COILS & E-LIQUIDS
The Geekvape Obelisk tank works with the Geekvape Zeus coil range (not included) and is recommended for use with high VG e-liquids (VG:PG 70:30 and above).
What e-liquid can you use in the Geekvape Obelisk tank?
When used with Geekvape 0.4Ω Z1 and 0.2Ω Z2 coils, the Obelisk tank is best used with high VG e-liquids with a VG:PG ratio of around 70:30 or 80:20.
What is sub-ohm vaping?
Sub-ohm vaping refers to vaping with a coil with an ohm (Ω) rating below 1.0. When pairing low resistance coils with high powered devices and high VG e-liquids, this method of vaping will produce thicker, denser vapour clouds, more intense flavour and stronger nicotine hit.
Do note that while sub-ohm originally referred to vaping with any coil less than 1Ω, vape technology has advanced and some modern MTL coils often have a resistance of less than 1Ω.
See The Beginners Guide to Sub-Ohm Vaping for more information.
What is the difference between Mouth-to-Lung (MTL) and Direct-Lung (DL) vaping?
In Mouth-to-Lung vaping you inhale vapour and hold it in your mouth for a moment before inhaling again for the vapour to reach your lungs. In Direct-Lung vaping you inhale in one continuous breath into your lungs. See MTL v DL for more information.
- Capacity: 2ml
- Filling: Top fill
- Device Compatibility: Geekvape Obelisk
- Coil Compatibility: Zeus coil range
Whats in the Box?
- 1 x Geekvape Obelisk Tank (2ml)
- Coils not included
At E-Cigarette Direct we pride ourselves on providing you with superb after-sales support, and aim to provide rapid replacements for any faulty device under warranty. This page details the warranties you get with your device, and how to get a replacement.
Your charger comes with a 12 month warranty.
All mods and batteries are under warranty for three months.
All clearomisers (tanks) with the exception of CE5 clearomisers are under warranty for six months. CE5 clearomisers (tanks) are under warranty for one month.
Please note - these warranties do not apply to the coil within a clearomiser or tank which is a consumable product as below.
Coils are a consumable product, and as such, will be replaced only if faulty on arrival. Please let us know within 5 days of receipt if your new coil does not work.
What does your warranty mean?
We guarantee that your device is, and will remain, free from defects for the period of the warranty. Please note - this applies to faulty products, and not accidental damage (e.g. dropping on a hard floor!)
The above warranties are subject to our terms and conditions. Please see our full warranty information for further details.
What if the warranty has run out?
We're still here to help! Many problems can be diagnosed and solved (or we can point you towards one of our helpful guides), so send us an email, give us a call for advice or pop into one of our stores for face-to-face support and help.
How do I get a replacement?
In the unlikely event you have a problem with your device, just contact our friendly customer service team on [email protected]
You’ll need to return the item (we can cover a free delivery charge). If we are unable to diagnose and solve your issue, we’ll send you a replacement by Royal Mail First Class. It helps if you have your order number, but if not our team should be able to find your order using your email address.
Delivery & Returns
Hassle Free Returns plus Free Delivery On Orders Over £15
Second Class First Class Tracked 24 Up to £14.99 £2.49 £2.99 £4.99 £15 to £19.99 FREE £1.99 £2.99 £20 to £99.99 - FREE £1.99 £100 + - - FREE
Unfortunately, we can no longer deliver to EU addresses outside the UK due to new EU regulations.
Hassle-Free Returns - & 90 Days to Change Your Mind
Need to return an item? We aim to make the process as easy as possible (it’s also free!)
Just send an email to our friendly customer service team on [email protected], give us a call on 01792 852843 or contact us on chat.
When can I make a return?
When you have an unwanted present or have changed your mind - you’ve got 90 days to decide! Please note this only applies when you have not used the product, and it is in a resalable condition.
You have a faulty product under warranty.
You can see our full returns policy in our terms and conditions.
Not in the UK?
You can see the full list of countries we deliver to here.
Using Your Tank: Best Practice
Follow these simple steps to get the most out of your tank.
- When filling, always avoid getting e-liquid in the centre tube.
- Don’t hold down the button before inhaling.
- When attaching the coil, screw it in firmly but don’t over-tighten.
- Make sure you use the right power settings. If unsure, check the manual or start with a low power setting and work your way up till you get the right hit.
How To Maximise the Life Of Your Coils
Always allow your e-liquid to soak into your coil for at least five minutes before using it. This will help prevent your coil from burning out.
When you have a more powerful coil, or one with more wicking material, it’s also a good idea to prime it by applying a few drops of e-liquid into the coil holes before filling.
Once you’re using the device, it is important to keep your tank topped up. If the e-liquid gets too low and the coil is exposed, the coil can burn out.
For more advice, see Seven Easy Ways to Stop Your Coil From Burning Out: