Gen X Kit

by Vaporesso

The Gen X is created from aircraft grade aluminium which has gone through a cold forging process and precision CNC manufacturing to create a device which is strong, light and long lasting.

The device uses the Axon chip to make the mod easier to use. The chip also provides pulse mode, which provides a pulse of power every 0.2 seconds for a consistent performance throughout every inhale, as well ECO, Smart TC and DIY modes.

The included, upgraded NRG-S tank uses a 0.15 Ω GT4 Meshed and a 0.18 Ω GT Meshed coil to maximise the interaction between the surface area of the coil and e-liquid for improved absorption and temperature dispersion, which leads to thicker vapour and improved flavour. The tank also comes with push-pull coils and a push-to-fill refilling mechanism to ensure that both changing the coils and filling with e-liquid is quick and easy.

Who is the Vaporesso Gen X kit for?

The high wattage output, low resistance coils and modes make this suitable for experienced vapers who are familiar with high wattage vaping and prefer thick, dense vapour and an airy, Direct-Lung vape.

Compatibility

The NRG-S tank works with GT coils and will work with most mods with a 510 connection. To make the most of the meshed coils we recommend using with a mod capable of a high wattage output.

The Gen S 220 W mod will work with most tanks with a 510 fitting. To enjoy the higher wattage output, we recommend using a tank compatible with low resistance coils.

Coil ratings

0.18 Ω GT Meshed Coil: 50 - 85 W
0.15 Ω GT4 Meshed Coil: 50 - 75 W

FAQs

What e-liquids can you use in the Vaporesso Gen X?

The device, when used with the included coils, is best used with high VG e-liquids with a VG:PG ratio of 70:30 or 80:20.

How long do the coils last?

Coil life depends on many factors, including how long you puff for and the wattage you use your coil at. Low resistance coils are used at higher wattages and do not last as long as high resistance coils.

You can extend coil life by priming the coil before usage (see product care), by not going above the recommended wattage and by topping up your tank so that the coil never dries out. With care, the GT coils in this kit can last anything from a few days to a week.

What is ECO mode?

ECO mode prioritises battery life, and enables you to go longer between charges. Of course, there is a pay-off in terms of performance, but it’s handy when you find yourself low on battery and a long way from a plug!

What is smart TC mode?

Intelligent temperature control (TC) aims to take some of the work out of TC vaping. It detects when you connect a temperature control coil, and automatically works out the best settings for you – all you have to do is set the temperature. For more information on TC and TC smart mode see our guide to Vaping Modes.

What is DIY mode?

While many of the features on the Gen X kit are designed to make things easier, DIY mode offers the control that expert vapers need to have complete control over their settings and their vape. It also makes the Gen X great for vapers who want the option to go more advanced in the future.

Can I charge my 18650 batteries overnight?

Lithium batteries should not be left unattended when charging. We also recommend using the Nitecore Intellicig Charger I2 or I4 for efficient charging and peace of mind. For more information see our battery safety infographic.

Specs

• Size: 144.8 x 49.4 x 27.6 mm
• Tank capacity: 2 ml
• Output wattage: 5 - 220 W
• Resistance range: 0.03 - 5 Ω
• 0.91 inch OLED Screen
• Charging current: 5 V / 2.5 A
• Chipset: AXON Chip
• Mode: Pulse Mode / Power ECO / Smart TC / DIY
• Battery: 2 x 18650 (Not Included)

• 1 x Gen X Mod
• 1 x NRG-S Mini Tank
• 1 x GT Meshed Coil (pre-installed)
• 1 x GT4 Meshed Coil
• 1 x Spare Drip Tip
• 3 x O-rings
• 1 x USB Cable
• 1 x Warranty Card

Hassle Free Returns plus Free Delivery On Orders Over £15

Delivery Prices and Speeds

Due to the current Covid pandemic, Royal Mail are dealing with both huge demand and staff shortages. Our post men and women are doing a tremendous job despite that, but please be aware that from time to time deliveries may take a little longer than usual.

Hassle-Free Returns - & 90 Days to Change Your Mind

Need to return an item? We aim to make the process as easy as possible (it’s also free!)

Just send an email to our friendly customer service team on [email protected], give us a call on 01792 852843 or contact us on chat.

When can I make a return?

• When you have an unwanted present or have changed your mind - you’ve got 90 days to decide! Please note this only applies when you have not used the product, and it is in a resalable condition. 

• You have a faulty product under warranty.

You can see our full returns policy in our terms and conditions.

Not in the UK?

You can see the full list of countries we deliver to here.

Using Your Tank: Best Practice

Follow these simple steps to get the most out of your tank.

• When filling, always avoid getting e-liquid in the centre tube.
• Don’t hold down the button before inhaling.
• When attaching the coil, screw it in firmly but don’t over-tighten.
• Make sure you use the right power settings. If unsure, check the manual or start with a low power setting and work your way up till you get the right hit. 

Also see: 14 Ways to Stop Your Clearomiser from Leaking.

The Right and Wrong Ways to Treat Batteries!

Battery Safety Information

Do:

• Ensure you use the correct charging equipment for your e-cig (see below).
• Charge batteries on a hard surface.
• Turn your battery off when not in use.

Don’t:

• Use damaged batteries.
• Leave charging batteries unattended.
• Allow contact between your batteries and water.
• Carry in a pocket with coins or keys. (The Kbag is a great way to carry batteries securely and safely).
• Expose your battery to sunlight, extreme heat or cold.

For more information see our E-Cig Battery Safety Infographic.

Recommended Charging Equipment

We recommend the Veho Plug Adaptor and the Nitecore Intelli charger (for external batteries). Both are high quality devices from a reputable manufacturer, have performed well in testing and have the right voltage output for e-cigs.

Extending Your E-Cig Battery Life

With regular usage, your e-cig battery will usually last for 3 months, although they can last longer. The following steps can help extend the life of your battery

1. Cleaning your battery terminal. The most effective way to do this is to use a cotton swab soaked in alcohol, but you can also clean it with a tissue or a cotton swab.

2. Keeping your battery charged. Keeping some charge in your battery can extend your battery life, especially if you go for some time without using it.

Also see: 9 Ways to Extend the Life Of Your Battery | Trouble Shooting Battery Issues.

Sub Ohm Vaping: Extending the life of your coil

When you vape a coil with a resistance level lower than 1 ohm, you are sub ohm vaping.

Sub ohm vaping is great for producing large clouds of vapour, but there are some differences in usage. Understanding these can help maximise your vaping experience.

Sub ohm coils have a larger surface area than regular coils. So before using a coil, it’s even more important to prime the coil before usage. With most devices, this means adding a couple of drops of e-liquid to the holes in the side of the coil (the ports) and down the hole in the top of the coil. Once you’ve done this, and after adding e-liquid to your tank, you should allow the coil to soak for at least five to ten minutes.

When you’re using the device, always ensure that e-liquid is covering the coil. (You should do this anyway, but it’s doubly important with a sub ohm coil.)

Why? Well, when power hits the coil, you don’t want it to be dry. Following these simple steps helps the coil last much longer, and will ensure a pleasant vaping experience.

Sub ohm coils also need more power than regular coils, so ensure that your vape battery or mod is suitable for the coil you are buying.

For more advice, see Seven Easy Ways to Stop Your Coil From Burning Out: